Power Conversion Engineering Talk to an engineer (888) 597-9255
Products Power Conversion Engineering Engineered for high thermal endurance, grid stability across Spanish distribution networks, and seamless integration with CPO platforms via OCPP 1.6J / 2.0.1.
Navigating the rapid electrification of Iberia driven by European Green Deal directives, national subsidies, and rigid low-voltage technical regulations.
Spain’s Plan MOVES III and the PERTE VEC (Strategic Project for Economic Recovery and Transformation of the Electric and Connected Vehicle) have funneled over €800 million into charging infrastructure. CPOs and fleet operators require EVSE suppliers who provide equipment that strictly qualifies for state co-financing—mandating MID-compliant metering, OCPP interoperability, and high operational uptime.
The Spanish Electrotechnical Regulation for Low Voltage (ITC-BT-52) dictates precise installation schemes (Scheme 1, 2, 3a, 3b, and 4) for private, commercial, and multi-dwelling unit (MDU) installations. Our chargers feature built-in DC 6mA residual current detection (RCD), automatic reclosing mechanisms, and direct compatibility with split-meter configurations required by Spanish distribution system operators (DSOs).
Legislation in Spain enforces mandatory EV charger installation across non-residential private parking facilities. Supermarkets, corporate offices, logistics parks, and shopping centers must maintain 1 charging point per 40 parking spaces. Commercial property developers rely on our high-density dual-socket AC chargers and modular DC fast charging posts to meet these legal minimums cost-effectively.
From intense Andalusian summer heatwaves to complex multi-family residential meter boards in urban Madrid and Barcelona.
Over 65% of Spain's urban population resides in multi-dwelling apartment complexes with shared underground garages. Installing individual charging points presents acute grid capacity challenges and complex metering routing.
Logistics corridors connecting the ports of Valencia, Barcelona, and Algeciras to inland distribution hubs in Madrid are rapidly electrifying light commercial vehicles (LCVs) and heavy transport fleets.
Charging stations along key trunk routes (Autovías A-1 to A-6, AP-7 Mediterranean corridor) require bulletproof reliability, extreme surge protection, and payment gateway interoperability.
Paradores, hotels, golf resorts, and retail chains across Spain leverage dual-socket AC floor pedestals as an amenity to attract high-value EV drivers.
Compare our standard industrial EV charging hardware platforms designed for turnkey integration by Spanish EPC contractors and CPOs.
| Platform Category | Input Voltage & Grid Grid | Output Power & Architecture | Efficiency & Cooling | Smart Protocol & Security | Key Certifications |
|---|---|---|---|---|---|
| AC Commercial Wallbox | 230V Single Phase / 400V 3-Phase + N + PE (50Hz) | 7.4kW (32A) or 22kW (32A x 3) Mode 3 | > 99% Efficiency Natural Convection |
OCPP 1.6J / 2.0.1 Wi-Fi, Ethernet, 4G, RFID |
CE, TUV, EN 61851-1, ITC-BT-52 |
| Dual-Socket AC Pedestal | 400VAC 3-Phase ±15% (TN-S / TN-C-S / TT) | 2x 22kW (Independent dual outlets) | > 98.8% Efficiency Internal Temperature Controlled Fans |
MID Meter, ISO 14443 RFID, POS Ready | CE, RoHS, IEC 62196-2, IP55/IK10 |
| Modular DC Fast Charger | 400VAC 3-Phase (3P + PE), PFC > 0.99 | 60kW to 180kW (CCS Combo 2 / CHAdeMO) | ≥ 96.5% Efficiency (SiC Topology) Force Air Cooled Duct Design |
OCPP 1.6J / ISO 15118 7" High-Brightness Touchscreen |
CE, IEC 61851-23/24, DIN 70121 |
| Ultra-Fast DC Charging Post | 400VAC ±15%, 50Hz (Grid connected or Buffer) | 240kW to 360kW Split Power Distribution | ≥ 96.5% Efficiency Liquid Cooled Cables (up to 500A) |
ISO 15118 Plug & Charge AFIR Compliant Credit Card Terminal |
CE, TUV Mark, MID DC Metering |
| Auxiliary Power Subsystems | 85VAC – 264VAC Wide Universal Input | 12VDC / 24VDC (36W to 600W Isolated) | Up to 94% Efficiency -40°C to +85°C Operation |
Modbus RTU / CANbus Diagnostics | UL, CE, CB, FCC, EN 55032 Class B |
Founded on a legacy of high-reliability power design dating back to 1961 (Wall Industries Engineering Lineage), our technical team brings decades of precision military, medical, and industrial power topologies into the electric vehicle sector. We do not simply assemble off-the-shelf components; we design, test, and manufacture complete OEM EVSE platforms from the ground up.
Over 70% of Spanish installations require specialized adaptations—custom cable lengths, specific enclosure colors, integrated DNO metering cabinets, or modified mounting brackets. Our modified-standard program delivers tailored engineering modifications within days, preserving proven core electrical safety testing.
Every power converter module and fully assembled EV charger undergoes stress testing inside environmental chambers simulating -40°C to +85°C thermal cycling, 95% relative humidity, salt mist corrosion resistance, and 4kV surge immunity testing to guarantee operational longevity across Iberia.
Operating under ISO 9001:2015 and ISO 14001:2015 certified manufacturing facilities, we enforce strict counterfeit component prevention, automated optical inspection (AOI), full burn-in testing under peak load, and detailed end-of-line test documentation for every unit shipped to Spain.
Direct technical answers to the most common queries raised by Spanish CPOs, electrical installers, engineers, and distributor buyers.
Our EV chargers are natively designed to satisfy all electrotechnical provisions of ITC-BT-52. This includes built-in DC 6mA residual direct current detecting devices (RDD-DD) eliminating the need for expensive external Type B RCDs, integrated overvoltage protection devices (VPU), support for automatic reclosing systems, and secondary terminal blocks dedicated to external current transformer (CT) clamps for dynamic load balancing across home or building mains.
Southern Spain regularly experiences ambient temperatures exceeding +40°C during peak summer months. Our chargers utilize industrial-grade power semiconductor devices (Silicon Carbide / GaN MOSFETs) with extended thermal derating curves. Coupled with isolated heat dissipation channels and intelligent temperature-triggered fan arrays, our units maintain 100% nominal continuous output up to +50°C without premature power derating or safety shutdowns.
Yes. All intelligent AC and DC models feature native open-source OCPP 1.6-JSON (upgradable to OCPP 2.0.1) compliance. We have verified full interoperability with major European and Spanish backends, including Electromaps, Iberdrola Waylet, Endesa X Way, EVCharge, and Has.to.be. CPOs gain complete remote management capabilities—over-the-air (OTA) firmware updates, remote diagnostics, dynamic tariff management, and billing data streaming.
Absolutely. To qualify for Plan MOVES III government rebates in Spain, chargers must feature smart connectivity (OCPP), MID-certified energy meters for public charging applications, dynamic load control capabilities, and high energy efficiency ratings. Our entire commercial wallbox and DC fast charger range fulfills every technical prerequisite mandated by IDAE (Instituto para la Diversificación y Ahorro de la Energía).
Standard catalog modules and AC chargers are maintained in active stock buffers with dispatch capability within 3 to 5 business days. For customized OEM/ODM orders—featuring custom brand liveries, specialized connector configurations, or modified firmware protocols—prototype production takes 10 to 15 business days, while volume container production typically ships within 3 to 4 weeks, backed by direct air/sea logistics options into Madrid, Barcelona, or Valencia ports.
Our master-slave DLM architecture monitors the total real-time electrical demand of the building grid connection using external current transformers installed at the primary distribution panel. As domestic power consumption spikes (e.g., during evening hours), the master charger automatically broadcasts reduced power limits to all connected slave charging nodes over RS485 or Wi-Fi. Once household demand drops, charging speeds automatically ramp up, guaranteeing zero main fuse trips.
We provide a standard 3-year factory warranty on all AC charging units and DC power modules, extendable to 5 years upon request. We supply comprehensive spare part kits (replacement power boards, control ICs, RFID assemblies, cables) directly to our authorized Spanish distributors and installer partners, alongside technical documentation, schematics, and direct engineering video support.
Looking for reliable, ITC-BT-52 compliant EV charging infrastructure or high-efficiency DC power conversion modules tailored for the Spanish market? Talk to our engineering team today.